2 english Table of contents Introduction.... 1 Driver installation... 2 Making sure installation was successful. 5 Removing drivers... 5 Introduction Thanks for choosing the Replicator 2.0. It offers a sim- ple, flexible and highly scalable connectivity solution between the Notebook and any USB 1.0/1.1/2.0 com- pliant devices.
You do not have to print the entire manual Dicota REPLICATOR 2 but the selected pages only. Below you will find previews of the content of the user manuals presented on the following pages to Dicota REPLICATOR 2. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
The Replicator 2.0 adds one 4-Ports USB 2.0 HUB; 2 PS/2 ports; 1 RS232 port; 1 USB 2.0 LAN port, which supports 10/100 Mbps transfer rate. Juvenile 400 degreez download free youtube. Of course the Replicator 2.0 can connect the latest higher performance peripherals, such as high-resolu- tion video conferencing cameras, scanners and prin- ters. You can enjoy the Replicator 2.0 to extend your USB 2.0 devices.
System requirements • USB 2.0 host controller • Windows 2000/XP Package contents: • 1 x USB 2.0 Replicator 2.0 • 1 x USB 2.0 A to B type cable (1800 mm) • 1 x AC Power Adapter (DC 5 V/3 A) • 1 x Driver CD • 1 x User’s manual LED indicator description: • Good link status – When the USB Replicator 2.0 is connected to the PC or Notebook, all of the LED indicators will turn on. (Note: The Ethernet Linked to the Network or Internet) • Power LED indicator – When just the power adapter is plugged into the Replicator 2.0, the POWER LED indicator and PS/2 LED will turn on. • Ethernet LED indicator – When the Ethernet works correctly, the LED indi- cator will turn on the red LED. – When the Ethernet work under 100 Mbps Net- work, the LED indicator will turn on the red and green LED at the same time. Notes • For the Replicator 2.0 working under stable environ- ment, please be sure to use the power adaptor.
• When the USB 2.0 HUB ports become overloaded, please refresh or re-plug the Replicator 2.0 into the Notebook to active the ports. Driver installation • Windows 2000/XP Step 1: • Insert the Driver CD into the CD-ROM drive. • Double click the “USBPR2.0_4.00.exe” program of Driver CD to install. Kartochki shemi provedeniya eksperimentov v dou. Step 2: Select the language to continue. Step 3: Click “Next” to continue.
This TAA compliant 4 Port USB 2.0 Hub connects to one USB 2.0 port on a Mac or PC computer, adding four USB 2.0 ports - allowing you to maximize the number of high speed USB peripherals connected to your computer. The hub supports cascaded installation with other USB 2.0 hubs, supporting up to 127 USB 2.0 device connections - a scalable solution for connecting multiple USB devices to a single host computer. The 4 port hub includes a power adapter, but can be powered through USB bus connection to the host computer - allowing you to install the hub as needed without worrying about the availability of a power outlet.
The USB 2.0 hub offers an attractive black casing that suits any operating environment and includes a 3ft USB 2.0 A/B male-male cable, for the connection between the hub and the host computer. Warranty Information Warranty 2 Years Hardware Chipset ID Genesys Logic - GL850G Industry Standards USB 2.0 Interface USB 2.0 Ports 4 Performance Maximum Data Transfer Rate 480 Mbps MTBF 3,629,493 hours Connector(s) External Ports 1 - USB B (4 pin) Female 4 - USB Type-A (4 pin) USB 2.0 Female Software OS Compatibility OS Independent; No software or drivers required. It is possible to use some USB hubs without a power supply, however, doing so may prevent the USB hub or certain high-power USB peripherals from operating. It is always recommended to use an included power supply with a USB hub when possible.
When a power adapter is not used on a hub that comes with a power adapter, power is drawn from the USB port on the computer and then divided between the ports on the hub. This reduces the power delivery to individual ports and high-powered USB peripherals, such as external hard drives, may not start. On USB hubs that can use a power adapter, more power can be supplied to USB ports than what is possible with a single USB port. If your USB peripherals require power adapters, they probably do not require power from the USB port and can be used on a USB hub without a power adapter. With USB peripherals that use power adapters, the USB ports on the hub are only used for data transfer and do not draw power from the hub. USB peripherals that require low power (for example, keyboards and mice) can be used on hubs without a power adapter, in conjunction with other low-power USB peripherals. In this case, power is drawn from the computer's USB port, as described above.